The Premium Remanufactured Brake caliper range consists of 5,530 part numbers and offers 95% availability of the most popular vehicles on the road, from stock.

With nearly 80% of the vehicle car parc covered by just a fifth of our range, you can be sure that we'll have what you want, when you want it.

Should you need an unusual caliper, Shaftec also offer a same day dispatched 'Recon & Return' service.

All calipers are supplied in anti-corrosion rust prevention packaging designed to extend the part shelf life and to ensure that your remanufactured caliper reaches you 'factory fresh'.

Remanufacturing as it should be

To Shaftec, remanufacturing isn’t just a poorer substitute for 'new' - it's a process which results in components that are as good as new and perform that way, too.

Shaftec have been doing it since 1979, so they know what they're talking about.

Each caliper is stripped right back to the original casting, inspected to ensure that there are no defects, refurbished to the original state and then reassembled by hand using all new components.

That means 100% new pistons, springs, actuation and seals. Nothing is left untouched and everything is completely renewed to the highest quality of ISO 9001/2000.

After assembly, each individual caliper is 100% pressure tested beyond the capacity experienced on the vehicle.

That's why Shaftec are confident to be able to supply a 24 month 38,000 km. warranty.

At Shaftec, everything is carried out under one roof at their remanufacturing plant in the heart of the UK.

To discover more about the full Shaftec range of Brake Calipers, Steering Racks, Steering Pumps and Driveshafts, as well as new Driveshafts, CV Joints, Steering Pumps, CV Boots and Steering Gaiters, go to www.shaftec.com

CV Joints & Boots

The Shaftec range of CV Joints is the widest in Europe, consisting of 1,250 part numbers, which between them account for almost 99% of the European vehicle parc.

Shaftec aim to be the first to have 'new to range' parts and in most cases achieve this.

The on-going range development programme means that they constantly add new parts for the most modern vehicles on the road.

Production standards are premium, which is why Shaftec can confidently offer a 24 month, 38,000 kilometre warranty.

All CV Joints are supplied with the boot, 2 steel clips, grease, hub nut and replacement circlip.

The best boots for the best CV Joints

Our quality range of conventional tailored fit CV boots consists of over 500 part numbers. The Shaftec Universal CV boot range consists of 8 part numbers, which cover 98% of all applications.

All boots are made from premium grade rubber and are highly resistant to water, salt and grit ingress.

Unsurpassed Service

At Shaftec, everything they do is carried out under one roof at their remanufacturing plant in the heart of the UK.

To discover more about the full Shaftec range of Brake Calipers, Steering Racks, Steering Pumps and Driveshafts, as well as new Driveshafts, CV Joints, Steering Pumps, CV Boots and Steering Gaiters, go to www.shaftec.com

Shaftec have been remanufacturing driveshafts for over 20 years.

Entirely remanufactured in the UK, Shaftec are proud to offer the biggest range in the European aftermarket.

Together, the new and remanufactured programme of Shaftec branded driveshafts total more than 5300 references, which covers 98% of the European car parc.

Shaftec remanufacture the programme under the strictest of conditions. Each driveshaft is stripped right back to the bare bones and inspected to ensure that there are no defects.

If they pass the stringent inspection process, they are then refurbished to the original state and reassembled by hand using new ancillary parts – that’s brand new CV joints, boots, grease and clips.

After assembly each part is tested to the extreme to meet ISO 9001/2000 quality standards.

All Shaftec branded driveshafts are backed by the highest marketing, data and cataloguing support and accompanied by a 24 month, 24,000 mile warranty.

Remanufacturing as it should be

To Shaftec, remanufacturing isn’t just a poorer substitute for 'new'- it’s a process which results in components that are as good as new and perform that way, too.

They’ve been doing it since 1979, so they know what they’re talking about.

Take their range of Steering Racks and Pumps.

Each one is stripped right back to its bare casting, inspected to ensure that there are no defects, refurbished to the original specifications and then reassembled by hand using all new components that conform to OE specification.

Every unit is 100% factory tested and supplied with a unique test certificate. That’s why Shaftec are confident to be able to supply a 12 month, 19,000 km. warranty.

At Shaftec, everything they do is carried out under one roof at their remanufacturing plant in the heart of the UK.

To discover more about the full Shaftec range of Brake Calipers, Steering Racks, Steering Pumps and Driveshafts, as well as new Driveshafts, CV Joints, Steering Pumps, CV Boots and Steering Gaiters, go to www.shaftec.com